Fruit juice beverage production line maintenance？

How to do the maintenance work of fruit juice beverage production line in daily use? Let's have a look at the following:

1. Fruit juice beverage production line because the winding machine is an automatic beverage production line, the size of easy pull bottle, bottle pad and bottle cap should be uniform.

2. Before starting up, the beverage production line must be turned with the crank handle to check whether there is any abnormality in the rotation, and it is confirmed that it is normal before starting up.

3. When adjusting the beverage production line, the tools should be used appropriately. It is forbidden to remove the parts with too large tools or too hard to avoid damage to the machinery or affect the performance of the beverage production line.

4. When the beverage production line is adjusted, make sure to tighten the loose screws. Turn the beverage production line with the crank handle to see whether the action meets the requirements, and then you can start the car.

5. The filling machine must be kept clean. During the production of the beverage production line, the liquid medicine or glass debris should be removed in time to avoid damage and corrosion of the filling machine.

6. Clean each part of the surface of the beverage production line and add clean lubricating oil to each activity department before the shift.

7, should be a big scrub once a week, especially in ordinary use is not easy to clean the place wipe or blow clean with compressed air.

So want to extend the life of fruit juice beverage production line, usually to do a good job of maintenance.